SHOP

1 vintage U.S. World War II OSS stiletto fighting knife.  This historic OSS stiletto would make an important addition to any collection.

The knife measures 11 5/8″ overall.  The blade itself measures just under 6 3/4″.  The blade has one Rockwell test mark.  The original black rubber scabbard o-ring always breaks down over time.  Many collectors replace the black rubber o-ring with one from a hardware store.  The original o-ring was exactly that–a standard black rubber o-ring, plain and simple.  

Mike Silvey’s book Knives of the United States Military World War II features this knife.  M.H. Cole’s The Best of U.S. Military Knives also covers this knife.  In addition, Frank Trzaska’s article “The O.S.S. Stiletto” published in Knife World Magazine’s Military Knives–a Reference Book discusses this knife as well.  

The LF&C pancake flipper scabbard for this knife is in premium condition. 

This OSS stiletto has both rare condition, AND it was actually carried—note that unlike most OSS stilettos in this condition with a mint blade (the were never carried) the top of the pancake flipper sheath had a belt woven through it. 

The best Robeson USMC you will ever see.  This near-mint Robeson USMC knife would make a rare addition to any collection.  
 

The has its correct black stitching sheath, with the correct zigzag pattern snap.  The knife has its correct welded pommel (note the minor voids visible after Robeson cutlers smoothed the pommel end after welding), and perfect blued blade.  

1 WW2 Japanese Army Officer’s sword made by the well-known smith Nagamitsu available.  

This traditionally-made gendai katana has an expertly water-tempered wavy hamon.  This Japanese WW II Army Officer’s katana is in 1944 shin-gunto mounts (aka Type 3 mounts).  

The nakago is signed ‘Nagamitsu saku (made this)’.   

The blade measures 26 1/2″ (67.3 cm) (measured properly from the blade tip to the notch in the blade spine).  This sword has two latch releases. 

St. Croix Blades buys Japanese swords!  In need of an appraisal, or want to sell or consign your sword or entire collection?  Pricing out an estate?  Contact Us! 715-557-1688 via phone, or email us at info@stcroixblades.com.

1 antique World War II Japanese samurai Army Officer’s sword available.  The blade is a high condition sword by Okada Kaneyoshi.  This fine Japanese Army katana would make an important addition to any collection.

The showato blade measures 26 1/4″ (66.6 cm)–as measured properly with a tape pulled tight from the blade tip to the bottom of the notch in the habaki.  There is a Seki stamp above the signature.  All fittings have the matching assembly number ‘3’.  

Kaneyoshi is featured in John Slough’s book An Oshigata Book of Modern Japanese Swordsmiths 1868-1945 on page 74.  See photo above.  

Before ordering this knife you must complete the Automatic Knives Certification Form.  Click on the Contact Us link above, and we will email you the form.

The Piranha P-1 Pocket knife is functional and stylish with a good feel. It opens with a commanding kick and locks solidly into place. The lightweight 6061-T6 aluminum handle is hard anodized and features recessed grooves for added gripping power. Also, the knife is very thin which makes it quite comfortable for pocket carry with the titanium clip.

Blade: Handle: Overall Length- 7.375″
Length- 3.2″ 6061-T6 Type 3 Hard Coat Size Closed- 4.175″
Thickness- .090″ Anodized Aircraft Alloy Pocket Clip- Titanium
Material- 154-CM Hardware- All Stainless Steel
Hardness- 60-61 RC Springs, Pins, Buttons, and Screws
Straight or Serrated Weight- 2.4 oz.

This knife was in a collection.  The collector did not keep the box for this knife.   

Before ordering this knife you must complete the Automatic Knives Certification Form.  Click on the Contact Us link above, and we will email you the form.

This Corby Tanto Auto by Al Mar Knives has a tumbled and polished drop point tanto blade with false top edge. Handle is black anodized aluminum with safety auto button, milled ribs, stainless steel tip up clip, and lanyard hole.

Blade Length
3.25 in

Overall Length
 7.75 in

Weight (oz)
4.1

This knife was in a collection.  The collector did not keep the box for this knife.  

Vintage Gerber BMF survival fighting knife.  This classic Gerber survival knife would make an important addition to any collection. 

The blade measures 7 7/8”.  This knife measures 13 1/2” overall.

This knife has a compass in the front pouch, and a sharpening steel on the back of the sheath.

1 John Ek commando knife available.  This vintage Ek was made in Effingham, IL.  

This knife measures 12 1/2″ overall.  The blade itself measures 6 5/8″. 

This knife was made in the USA. 

Purchase of this knife requires signing of the Auto Knife Form.  Email info@stcroixblades.com to request the form.  

1 Hubertus 5 7/8″ Leverlock clip point auto.  
 

This German-made auto has fine sambar stag handles.  There is no box with this knife as it was in a collection.  The blade measures 2 5/8″.

Before ordering this knife you must complete the Automatic Knives Certification Form.  Click on the Contact Us link above, and we will email or text you the form.

1 new in the box Benchmade model 3200S Pardue auto knife available.  This is the May 2002 PROTOTYPE knife.  This early Benchmade would make an important addition to any collection.  
 

The blade is made with 154CM steel.  This knife has a 3 3/16″ blade.  
 

This knife was made in the U.S.A.

Purchase of this knife requires signing of the Auto Knife Form.  Email info@stcroixblades.com to request the form.  

1 Armando Beltrame 9″ picklock kris blade auto.  
 

This Italian-made auto has fine sambar stag handles.  There is no box with this knife as it was in a collection.  The damascus blade measures 3 15/16″.

No payments allowed online for this knife.  Click on ‘Purchase by Phone’ to buy this knife, or send us an email.  

Purchase of this knife requires signing of the Auto Knife Form.  Email info@stcroixblades.com to request the form.  

1 Hubertus 7 3/4″ Leverlock clip point auto.  
 

This German-made auto has fine sambar stag handles.  There is no box with this knife as it was in a collection.  The blade measures 3 1/4″.

No payments allowed online for this knife.  Click on ‘Purchase by Phone’ to buy this knife, or send us an email.